|
|
Post by NFFLcomish on Jul 23, 2007 22:55:36 GMT -5
No prob! Get to these change tomorrow!
|
|
|
|
Post by NFFLcomish on Jul 24, 2007 17:52:47 GMT -5
Is this better?  |
|
|
|
Post by south87 on Jul 24, 2007 21:48:15 GMT -5
|
|
|
|
Post by NFFLcomish on Jul 24, 2007 22:04:40 GMT -5
Sorry about that... I didn't notice but your right....does this look better?  |
|
|
|
Post by south87 on Jul 24, 2007 22:34:57 GMT -5
Not sure what it is, but the face mask and bottom of the helmet still look fuzzy compared to the first one you did. It's fine if that's as clear as it can get.
|
|
|
|
Post by NFFLcomish on Jul 24, 2007 23:24:43 GMT -5
I removed all effects that were being done to this helmet. Hopefully this will be to your liking now! The helmet I am using now was different than the first one I used. That could also be a difference. With the addition of the stripe I had to use another helmet! Does this looking better?  |
|
|
|
Post by NFFLcomish on Jul 24, 2007 23:43:34 GMT -5
Also another...went back to the original helmet I used...hope this helps. Also your bulldog one. Let me know about improvements to either...   |
|
|
|
Post by south87 on Jul 25, 2007 0:17:36 GMT -5
Man NFFLC, you're good! The 6-Fo' helmet is spot on! Can you darken up bulldog helmet a bit? It's late and my eyes are tired, but the red doesn't look like Georgia Bulldog red. Thanks for getting these to me so quickly. You do great work!
|
|
|
|
Post by NFFLcomish on Jul 25, 2007 5:59:17 GMT -5
The Georgia helmet was taken from Chris Creamer's site so its whatever they had as the Georgia helmet. I will look at their website tonight and find the real red and color it to that for you!
|
|
|
|
Post by NFFLcomish on Jul 25, 2007 17:57:43 GMT -5
You were right, the helmet was a bit too light red. I went and got the correct red from their website and so here you go...  |
|
|
|
Post by south87 on Jul 25, 2007 20:26:09 GMT -5
|
|
|
|
Post by NFFLcomish on Jul 25, 2007 23:08:43 GMT -5
How is this?  |
|
|
|
Post by south87 on Jul 26, 2007 23:42:09 GMT -5
Looks great! Now I have a silly question. Several of the helmets save as different sizes. I messed around with paint, but I can't figure out how to make them the same size and dimensions. Can you tell me how to do it?
|
|
|
|
Post by NFFLcomish on Jul 26, 2007 23:44:30 GMT -5
Not familiar with paint....but in corel paint shop pro you go to image/resize and then type in what size you want, and thats it! If that doesn't work I could always re-size them for you, just let me know what size you want!
|
|
|
|
Post by NFFLcomish on Jul 26, 2007 23:59:28 GMT -5
|
|
